ColorFabb HT vs ASA
Compare ColorFabb HT and ASA filaments side-by-side. See which one is best for your 3D printing project.
ColorFabb HT
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
ColorFabb HT
ASA
Tier Rating
Tier null
Tier A
Family
PETG
ASA
Nozzle Temp
270°C
220-275°C
Bed Temp
110°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
ColorFabb HT Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
ColorFabb HT Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is ColorFabb HT or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to ColorFabb HT (Tier null). However, the best choice depends on your specific needs: ColorFabb HT is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between ColorFabb HT and ASA?
ColorFabb HT prints at 270°C nozzle / 110°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do ColorFabb HT and ASA need an enclosure?
ColorFabb HT: not needed. ASA: recommended.
Which is more beginner-friendly: ColorFabb HT or ASA?
ColorFabb HT is more beginner-friendly as it doesn't require an enclosure.