EUMAKERS PLA vs PLA
Compare EUMAKERS PLA and PLA filaments side-by-side. See which one is best for your 3D printing project.
EUMAKERS PLA
-Versatile 3D printing filament
PLA
APolylactic Acid
Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
Detailed Comparison
Property
EUMAKERS PLA
PLA
Tier Rating
Tier null
Tier A
Family
PLA
PLA
Nozzle Temp
210°C
185-235°C
Bed Temp
60°C
50-60°C
Enclosure
not needed
not needed
Cooling
High part cooling usually beneficial
Moisture Sensitivity
low
moderate
Strengths Comparison
EUMAKERS PLA Strengths
PLA Strengths
- Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal
- Stiff non-composite thermoplastic, good tensile strength
Considerations
EUMAKERS PLA Caveats
PLA Caveats
- Creeps under sustained load
- Poor heat resistance, UV degradation, can shatter on drops
- Not great for sanding/gluing/painting/touch-ups
Frequently Asked Questions
Is EUMAKERS PLA or PLA better for 3D printing?
PLA is generally rated higher (Tier A) compared to EUMAKERS PLA (Tier null). However, the best choice depends on your specific needs: EUMAKERS PLA is best for various applications, while PLA is best for Easiest to print, cheap, widely available, fast, good bridges/overhangs, easy support removal.
What are the temperature differences between EUMAKERS PLA and PLA?
EUMAKERS PLA prints at 210°C nozzle / 60°C bed. PLA prints at 185-235°C nozzle / 50-60°C bed.
Do EUMAKERS PLA and PLA need an enclosure?
EUMAKERS PLA: not needed. PLA: not needed.
Which is more beginner-friendly: EUMAKERS PLA or PLA?
Both EUMAKERS PLA and PLA are beginner-friendly options.