Extrudr XPETG CF vs ASA
Compare Extrudr XPETG CF and ASA filaments side-by-side. See which one is best for your 3D printing project.
Extrudr XPETG CF
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Extrudr XPETG CF
ASA
Tier Rating
Tier null
Tier A
Family
PETG
ASA
Nozzle Temp
235°C
220-275°C
Bed Temp
70°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Extrudr XPETG CF Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Extrudr XPETG CF Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Extrudr XPETG CF or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Extrudr XPETG CF (Tier null). However, the best choice depends on your specific needs: Extrudr XPETG CF is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Extrudr XPETG CF and ASA?
Extrudr XPETG CF prints at 235°C nozzle / 70°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Extrudr XPETG CF and ASA need an enclosure?
Extrudr XPETG CF: not needed. ASA: recommended.
Which is more beginner-friendly: Extrudr XPETG CF or ASA?
Extrudr XPETG CF is more beginner-friendly as it doesn't require an enclosure.