Fiberlogy Easy PLA vs ASA
Compare Fiberlogy Easy PLA and ASA filaments side-by-side. See which one is best for your 3D printing project.
Fiberlogy Easy PLA
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Fiberlogy Easy PLA
ASA
Tier Rating
Tier null
Tier A
Family
PLA
ASA
Nozzle Temp
210°C
220-275°C
Bed Temp
60°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Fiberlogy Easy PLA Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Fiberlogy Easy PLA Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Fiberlogy Easy PLA or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Fiberlogy Easy PLA (Tier null). However, the best choice depends on your specific needs: Fiberlogy Easy PLA is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Fiberlogy Easy PLA and ASA?
Fiberlogy Easy PLA prints at 210°C nozzle / 60°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Fiberlogy Easy PLA and ASA need an enclosure?
Fiberlogy Easy PLA: not needed. ASA: recommended.
Which is more beginner-friendly: Fiberlogy Easy PLA or ASA?
Fiberlogy Easy PLA is more beginner-friendly as it doesn't require an enclosure.