Filamentworld PLA vs ASA
Compare Filamentworld PLA and ASA filaments side-by-side. See which one is best for your 3D printing project.
Filamentworld PLA
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Filamentworld PLA
ASA
Tier Rating
Tier null
Tier A
Family
PLA
ASA
Nozzle Temp
205°C
220-275°C
Bed Temp
55°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Filamentworld PLA Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Filamentworld PLA Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Filamentworld PLA or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Filamentworld PLA (Tier null). However, the best choice depends on your specific needs: Filamentworld PLA is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Filamentworld PLA and ASA?
Filamentworld PLA prints at 205°C nozzle / 55°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Filamentworld PLA and ASA need an enclosure?
Filamentworld PLA: not needed. ASA: recommended.
Which is more beginner-friendly: Filamentworld PLA or ASA?
Filamentworld PLA is more beginner-friendly as it doesn't require an enclosure.