Filatech FilaFlex40 vs ASA
Compare Filatech FilaFlex40 and ASA filaments side-by-side. See which one is best for your 3D printing project.
Filatech FilaFlex40
-Versatile 3D printing filament
ASA
AAcrylonitrile Styrene Acrylate
Excellent UV resistance (outdoors indefinitely), tough, matte surface
Detailed Comparison
Property
Filatech
FilaFlex40
ASA
Tier Rating
Tier null
Tier A
Family
Flexible
ASA
Nozzle Temp
230°C
220-275°C
Bed Temp
50°C
90-110°C
Enclosure
not needed
recommended
Cooling
Low to moderate; avoid drafts
Moisture Sensitivity
low
moderate
Strengths Comparison
Filatech FilaFlex40 Strengths
ASA Strengths
- Excellent UV resistance (outdoors indefinitely), tough, matte surface
- Less warping than ABS; low viscosity enables very high speed printing
- High heat tolerance (~boiling water range)
Considerations
Filatech FilaFlex40 Caveats
ASA Caveats
- Still off-gasses; enclosure/ventilation recommended
- Can still warp; needs tuning
Frequently Asked Questions
Is Filatech FilaFlex40 or ASA better for 3D printing?
ASA is generally rated higher (Tier A) compared to Filatech
FilaFlex40 (Tier null). However, the best choice depends on your specific needs: Filatech
FilaFlex40 is best for various applications, while ASA is best for Excellent UV resistance (outdoors indefinitely), tough, matte surface.
What are the temperature differences between Filatech FilaFlex40 and ASA?
Filatech
FilaFlex40 prints at 230°C nozzle / 50°C bed. ASA prints at 220-275°C nozzle / 90-110°C bed.
Do Filatech FilaFlex40 and ASA need an enclosure?
Filatech
FilaFlex40: not needed. ASA: recommended.
Which is more beginner-friendly: Filatech FilaFlex40 or ASA?
Filatech
FilaFlex40 is more beginner-friendly as it doesn't require an enclosure.